_

AutoCAD 2D v Revit 3D -Creating Detailed 2D Drawings
_
_
AutoCAD 2D v Revit 3D -Creating Detailed 2D Drawings
1 CPD

AutoCAD 2D v Revit 3D - Creating Detailed 2D Drawings from the Revit 3D Model

11/08/2020 11:00 AM - 12:00 PM

SPONSOR/S:

OVERVIEW:

In this second session we will take our previously modelled 3D house and look at how we can easily create our 2D drawings with very little effort. Attendees will be able to watch as we create Plans, Elevations and Sections at selected scales.

We will look at how we can create Detail and Call Out vies, again at selected scales…..all of these are directly created and linked to the original 3D model.

We will then use Cameras to create special views around the house (inside and outside). No set of drawing would be complete without looking at Schedules, in this case the automatic creation of all of the Doors and Windows used throughout the model.

SPEAKER:

Glenn Barrett
CAD/BIM Technical Consultant
Interscale

I have been involved in Engineering/Architecture for over 40 years and in the CAD Industry for over 35 years, and have used numerous BIM/CAD products including many Autodesk products (AutoCAD, Raster Design, Inventor, Revit, Navisworks, Civil 3D etc.), Microstation, QikDraw, TurboCAD, CivilCAD, InRoads, 4D (now 12D) SolidWorks, etc. I have written numerous CAD based books, training manuals, and have been a Contributing Editor for Australia's leading CAD magazines, CAD User and MultiCAD.

Through these organizations I have also presented numerous CAD seminars throughout Australia, New Zealand, and South East Asia on a wide variety of CAD topics. I have worked directly with both Autodesk and Bentley on numerous 1 day seminars, and short presentations on numerous CAD topics. As well as with numerous BIM/CAD dealerships in various roles. I have managed many BIM/CAD sites throughout Australia using a variety of BIM/CAD products, and trained many users through my own BIM/CAD Consulting company, as well as through the number of BIM/CAD dealers I have worked with

FAQs:

CPD Points: 1 Formal/Technical CPD point. This will be recorded in Design Matters Members' CPD Manager within 5 business days following the event.

Cancellation Policy: We know that situations sometimes arise preventing you from attending. However, Design Matters does incur costs in organising these events. If you find you cannot attend, cancellation fees may apply.

Privacy Policy: Design Matters respects your privacy. Registrant data captured at this site in not disseminated to any third party, but is used solely by the Design Matters to confirm your registration.

Disclaimer
_